Bacharach Fyrite INSIGHT, Инструкция по эксплуатации

Страница: 42 / 76

Fyrite INSIGHT
38
4.7 Temperature Measurement
The difference in temperature between two areas can be measured by us-
ing the analyzer’s two temperature channels and the Temperature Screen.
By using the T-Air channel as a reference, the temperature applied to
the T-Stack channel will be displayed on the Temperature Measurement
screen as differential temperature between the two channels.
Perform a differential temperature measurement as follows:
1. Press the
MENU (F2)
button to display the Main Menu.
2. Use the ▲▼ buttons to scroll to Temperature. Press ENTER to dis-
play the Temperature Measurement screen.
3. Install thermocouples in both temperature channel connectors.
4. Before taking a measurement, the temperature channels may need
to be zeroed, if not already displaying zero with both thermocouples
exposed to the same condition. Press
ZERO (F2)
if necessary.
4.8 Saving Test Data
Up to 100 sets (“snap shots”) of combustion test, pressure, or temperature
data can be saved in memory, which can later be recalled for viewing from
the Memory Directory.
1. First, display the screen that contains the data to be saved. In the
example below, all data associated with the Combustion Test RUN
screen will be saved.
2. Press the Save (F3) button to save the test data in the next avail-
able memory location.