56
57
8.2 Group 0 +(0-13 kg) installed in the rearward facing position with 5 point
h ISOFIX
8.2.1. Press ISOFIX button to pull out the arms.
8.2.2. Insert the arms into ISOFIX handles in the car. You will hear a distinctive click,
which means the fastening is correct. On both arms the indicator should be
green.
8.2.3. Take out the upper fastening belt of the safety seat and attach the hook in
one of three positions presented below. Tighten the belt and make sure it has been
properly mounted.
8.3 Group1(9-18kg) installed in the forward facing position with 5 point
vehicle belt
8.3.1 Make sure that the child seat’s 5-point harness is installed correctly
8.3.2 Place the child seat facing in the direction of travel on the vehicle seat.
8.3.3 Pull out the ISOFIX locking arm from the under of base.
8.3.4 Grasp the child seat with both hands and slide the two locking arms into the
insert guides until the locking arms engage with a CLICK noise on both sides. The
green safety button must now be visible on both sides.
CAUTION!
The locking arms are only correctly engaged if both of the safety buttons
are completely green.
8.3.5 Shake the child safety seat to make sure it is safely attached and re-check
thegreen safety buttons to make sure that both of them are completely green.
instruction
instruction
7.2 Group1(9-18kg) installed in the forward
facing position with 5 point ISO-FIX-
+vehicle belt
7.2.1 Make sure that the child seat’s 5-point
harness is installed correctly
7.2.2 Place the child seat facing in the
direction of travel on the vehicle seat.
7.2.3 Pull out the ISO-FIX locking arm from the
under of base.
7.2.4 Grasp the child seat with both hands and
slide the two locking arms into the insert
guides until the locking arms engage with a
CLICK
noise on both sides. The green safety
button must now be visible on both sides.
CAUTION!
The locking arms are only correctly
engaged if both of the safety buttons are
completely green.
7.2.5 Shake the child safety seat to make sure
it is safely attached and re-check the green
safety buttons to make sure that both of them
are completely green.
0-36kg
7.1 Group 0 +(0-13kg) installed in the
rearward facing position with 5 point harness
+ vehicle belt
7.1.1 Pull the vehicle seat belt and pass the lap
belt section through the red belt guidance and
under the sleeping cushion.
7.1.2 Pass the diagonal seat belt section
through the blue guidance on the back of the
child seat.
7.1.3 Fasten the seat belt and pull it tight,en-
sure that the seat belt is not twisted.
Note:
1.The child seat must only be installed in the
rearward facing position and angle of
maximum inclination(Fourth level).For be sure
the car seat has been installed in the right
place,please shake it before use.
2.Don not twist the belt!
3.Ensure the buckle tongues engage in the
vehicle seat buckle,you will hear an audible
CLICK!
Pas barkowy
Pas biodrowy
Pas biodrowy
Pas barkowy
instruction
instruction
7.2 Group1(9-18kg) installed in the forward
facing position with 5 point ISO-FIX-
+vehicle belt
7.2.1 Make sure that the child seat’s 5-point
harness is installed correctly
7.2.2 Place the child seat facing in the
direction of travel on the vehicle seat.
7.2.3 Pull out the ISO-FIX locking arm from the
under of base.
7.2.4 Grasp the child seat with both hands and
slide the two locking arms into the insert
guides until the locking arms engage with a
CLICK
noise on both sides. The green safety
button must now be visible on both sides.
CAUTION!
The locking arms are only correctly
engaged if both of the safety buttons are
completely green.
7.2.5 Shake the child safety seat to make sure
it is safely attached and re-check the green
safety buttons to make sure that both of them
are completely green.
0-36kg
7.1 Group 0 +(0-13kg) installed in the
rearward facing position with 5 point harness
+ vehicle belt
7.1.1 Pull the vehicle seat belt and pass the lap
belt section through the red belt guidance and
under the sleeping cushion.
7.1.2 Pass the diagonal seat belt section
through the blue guidance on the back of the
child seat.
7.1.3 Fasten the seat belt and pull it tight,en-
sure that the seat belt is not twisted.
Note:
1.The child seat must only be installed in the
rearward facing position and angle of
maximum inclination(Fourth level).For be sure
the car seat has been installed in the right
place,please shake it before use.
2.Don not twist the belt!
3.Ensure the buckle tongues engage in the
vehicle seat buckle,you will hear an audible
CLICK!
Pas barkowy
Pas biodrowy
Pas biodrowy
Pas barkowy
