42
43
6. Care and maintenance
6.1 How to use the harness buckle
· Guide the two buckle latches together 6.1.2 Make sure right side up
· Engage them before putting them into the harness buckle , this should make a
CLICK noise.
· Pull shoulder belts to remove all slack from the lap section ensuring the harness
lies flat and harness buckle locked. Open the harness buckle by pressing the red
button.
6.2 Care for the harness buckle
It is vital for the safety of your child that the harness buckle works correctly.
Malfunctions of the harness buckle are usually caused by accumulations of dirt or
foreign bodies.
Malfunctions are as follows:
· The buckle latches are ejected only slowly when the red release button is pressed.
· The buckle latches will no longer lock home (i.e. they are ejected again if you try
to push them in).
· The buckle latches engage without an audible CLICK.
· The buckle latches are difficult to insert (you feel resistance).
· The buckle latches are difficult to insert (you feel resistance).
5.Approval child safety car seat
Tested and certified according to ECE R 44/04 Group Body weight 0~36 kg
0 kg to 36 kg.
· The child safety seat has been designed, tested and certified according to the
requirements of the European Standard for Child Safety Equipment (ECE R
44/04). The test mark E (in a circle) and the certification number are located on
the orange certification sticker (sticker on the child safety seat).
· This certification will be invalidated if you make any modifications to the child
safety seat. ·The BabySafe Golden child safety seat must only be used to secure
your child in the vehicle. It must never be used as a seat or toy in the home.
Risk of injury due to unauthorized modifications!
Unauthorized technical modifications may reduce or entirely void the seat’s
protective properties.
· Do not make any technical modifications to the child seat.
· Use the child seat only as described in these user instructions.
The 906 offers a variety of mounting options, the following table indicates the types
of installation for the respective groups:
Group
vehicle belt
or only Vehice belt
Child installation
0+ (0-13 kg)
Vehicle Belt
5–point harness
1 (9-18 kg)
Vehicle Belt
or only Vehice belt
5–point harness
2, 3 (15-36 kg)
ISOFIX or Vehicle Belt
Vehicle Belt
instruction
instruction
6. Care and maintenance
6.1 How to use the harness buckle
6.1.1 Guide the two buckle latches together
6.1.2 Make sure right side up
6.1.3 Engage them before putting them into the
harness buckle , this should make a
CLICK
noise.
6.1.4 Pull shoulder belts to remove all slack from
the lap section ensuring the harness lies flat and
harness buckle locked. Open the harness buckle
by pressing the red button.
6.4 Cleaning the harness buckle
6.4.1 Open the harness buckle (press the red
button).
6.4.2 Grasp the metal plate from underneath and
turn it into a vertical position
6.4.3 Slide the metal plate through the slot
6.4.4 Remove the harness buckle
6.4.5 Soak the harness buckle in warm water with
washing-up liquid for at least an hour.Then rinse
and dry it thoroughly.
6.2 Care for the harness buckle
It is vital for the safety of your child that the
harness buckle works correctly. Malfunctions of
the harness buckle are usually caused by
accumulations of dirt or foreign bodies.
Malfunctions are as follows:
·
The buckle latches are ejected only slowly
when the red release button is pressed.
·
The buckle latches will no longer lock home
(i.e. they are ejected again if you try to push them
in).
·
The buckle latches engage without an audible
CLICK.
·
The buckle latches are difficult to insert (you
feel resistance).
·
The buckle only opens if extreme force is
applied.
6.3 Remedy
Wash out the harness buckle so that it functions
properly once again.
0-36kg
Harness
buckle latch
right side
wrong side
chart 4
chart 5
chart 6
