62
63
CAUTION! The lap belt section must lie as low as possible over your child’s hips
on both sides
8.5.10 Guide the diagonal seat belt section into the red belt holder of the headrest
until it lies completely in the belt holder and is not twisted.
Tip! If the backrest conceals the belt holder , you can adjust the headrest
upwards. The diagonal seat belt section can now be easily inserted. Now return
the headrest to the proper height.
8.5.11 Make sure that the diagonal seat belt section runs over your child’s shoulder
bone, and not in front of his or her neck.
For the safety of your child, before every journey in the car check that.
– The child safety seat is engaged on both sides with the ISOFIX locking arms in
the ISOFIX attachment points and that both green safety buttons are completely
green;
– The child safety seat is securely fastened;
– The lap belt section runs through the light red belt guides on both sides of the
seat cushion;
– The diagonal seat belt section on the side of the vehicle seat belt buckle also runs
through the light red belt guide of the seat cushion;
9 . Removal of the child seat
CAUTION! Remove the child seat from the vehicle
The child seat must never be transported in the car if it is not properly secured.
9.1 Group 0 + (0-13kg)
9.1.1 Release vehicle seat buckle if securing the child seat
9.2 Group 1 (9-18kg)
9.2.1 Release vehicle seat buckle if securing the child seat.
9.2.2 To release the ISOFIX fastening, squeeze the green safety button and the red
release button together, fist on one side, then on the other.
9.2.3 Slide the ISOFIX locking arms back into the seat shell.
9.3 Group 2 and Group 3 (15-36kg)
9.3.1 Release vehicle seat buckle if securing the child seat.
9.3.2 To release the ISOFIX fastening, squeeze the green safety button and the red
release button together, fist on one side, then on the other.
9.3.3 Slide the ISOFIX locking arms back into the seat shell.
10. Daily care and instructions
10.1 Daily Care
To ensure the full protective effect of the child safety seat:
– In the event of an accident with an impact speed above 10 km/h it is possible that
the child safety seat may have been damaged, but that the damage may not be
immediately obvious. In this case the child safety seat must be replaced. Please
dispose of it properly.
– Regularly check all important parts for damage. Make sure that the mechanical
components in particular are all in perfect working order.
– To prevent damage, ensure that the child safety seat does not become jammed
between hard objects (car door, seat runners etc.).
– Always have the child safety seat checked if it has been damaged (e.g. if it is
dropped).
– Never lubricate or oil parts of the child seat.
– In order to properly protect your baby, it is imperative that you install and use the
Golden 360 exactly as described in this manual.
Disposal of packaging
Container for cardboard
Cover
Residual waste, thermal utilisation
Plastic parts
In accordance with the labelling in the
designated container
Metal parts
Residual waste
Harness
Container for polyester
Buckle & latch
Container for metals
10.2 Cleaning
CAUTION! Please be sure to use only genuine 906 replacement seat covers, as the
seat cover is an integral part of the child safety seat which plays an important role
in ensuring that the system works properly. Replacement seat covers are available
from your retailer.
