44
45
6.3 Remedy
Wash out the harness buckle so that it functions properly once again.
6.4 Cleaning the harness buckle
– Open the harness buckle (press the red button).
– Grasp the metal plate from underneath and turn it into a vertical position
– Slide the metal plate through the slot
– Remove the harness buckle
– Soak the harness buckle in warm water with washing-up liquid for at least an hour.
Then rinse and dry it thoroughly.
6.5 Removing 5-point harness
· Loosen the 5-point harness of the child seat as much as possible by press the
button of the crotch belt.
· Turn the baby safety car seat to back, unzip the seat cover.
· Loosening the shoulder belt in order to access the metal link and connector at
the back of the child seat, remove the belt from connector, then remove the
shoulder belt from metal link.follow step
instruction
instruction
6.5 Removing 5-point harness
6.5.1 Loosen the 5-point harness of the child
seat as much as possible by press the button of
the crotch belt.
6.5.2 Turn the baby safety car seat to back,
unzip the seat cover.
6.5.3 Loosening the shoulder belt in order to
access the metal link and connector at the
back of the child seat, remove the belt from
connector,then remove the shoulder belt from
metal link.follow step ①②③,④⑤
6.5.4 Then from the front of the child seat, pull
out shoulder belt through the slots.
6.5.5 Pull below both,the shoulder pads and the
belts to the front through the slots. (Front side
of the child seat).
6.5.6 Remove the shoulder pads from the
shoulder belts and put them in the storage bag.
6.5.7 Roll the shoulder belts and place them
separately on both side into the fabric cover
from the slot of fabric.
0-36kg
instruction
instruction
6. Care and maintenance
6.1 How to use the harness buckle
6.1.1 Guide the two buckle latches together
6.1.2 Make sure right side up
6.1.3 Engage them before putting them into the
harness buckle , this should make a
CLICK
noise.
6.1.4 Pull shoulder belts to remove all slack from
the lap section ensuring the harness lies flat and
harness buckle locked. Open the harness buckle
by pressing the red button.
6.4 Cleaning the harness buckle
6.4.1 Open the harness buckle (press the red
button).
6.4.2 Grasp the metal plate from underneath and
turn it into a vertical position
6.4.3 Slide the metal plate through the slot
6.4.4 Remove the harness buckle
6.4.5 Soak the harness buckle in warm water with
washing-up liquid for at least an hour.Then rinse
and dry it thoroughly.
6.2 Care for the harness buckle
It is vital for the safety of your child that the
harness buckle works correctly. Malfunctions of
the harness buckle are usually caused by
accumulations of dirt or foreign bodies.
Malfunctions are as follows:
·
The buckle latches are ejected only slowly
when the red release button is pressed.
·
The buckle latches will no longer lock home
(i.e. they are ejected again if you try to push them
in).
·
The buckle latches engage without an audible
CLICK.
·
The buckle latches are difficult to insert (you
feel resistance).
·
The buckle only opens if extreme force is
applied.
6.3 Remedy
Wash out the harness buckle so that it functions
properly once again.
0-36kg
Harness
buckle latch
right side
wrong side
chart 4
chart 5
chart 6
