22
23
*Dzięki przelotkom montaż fotelika przy pomocy systemu mocowania ISOFIX jest
prostszy. Dodatkowo chronią one tapicerkę pojazdu. Kiedy przelotki nie są używane,
powinny być wypięte i przechowywane w bezpiecznym miejscu. W pojazdach ze
składanymi oparciami przelotki muszą zostać wypięte przed złożeniem oparcia.
Problemy z wpięciem są zazwyczaj spowodowane nagromadzeniem brudu lub ciał
obcych na przelotkach i hakach. Aby zlikwidować ten problem, usuń brud i wszelkie
ciała obce.
8.1 Grupa 0+ (0-13 kg): montaż tyłem do kierunku jazdy przy pomocy
5-punktowych pasów i pasa bezpieczeństwa pojazdu
8.1.1 Pociągnij za pas bezpieczeństwa pojazdu i przełóż pas biodrowy przez
prowadnicę niebieską pasa i pod wkładką.
8.1.2 Przełóż pas barkowy przez niebieską prowadnicę z tyłu fotelika.
8.1.3 Zapnij pas bezpieczeństwa pojazdu i mocno go ściągnij. Upewnij się, że nie
jest skręcony.
Uwaga:
1.
Fotelik samochodowy musi być
zamontowany tyłem do kierunku jazdy
w pozycji maksymalnego odchylenia
(poziom czwarty). Aby upewnić
się, że fotelik został prawidłowo
zamontowany, potrząśnij nim przed
użyciem.
2. Nie skręcaj pasa!
3. Upewnij się, że zatrzask prawidłowo
zablokował się w klamrze siedzenia
pojazdu
(z charakterystycznym
kliknięciem)
.
instruction
instruction
7.Instruction
Please read the chapter with your desired installa-
tion method in chapter first.
0-36kg
1. If your vehicle is not equipped with the ISO-FIX
insert guides as standard, clip the two insert guides
which are included with the seat
* With the cut-out facing upwards onto the two
ISO-FIX attachment points of your vehicle.
TIP:
The ISO-FIX attachment points are located
between the surface and the backrest of the vehicle
seat.
2. Move the head restraint on the vehicle seat to the
upper position.
3. Pull out the ISO-FIX adjuster to pull out both
locking arms,from the under of base pull the
locking arm to and fro until you hear a
CLICK
sound
which indicates they are fully engaged.
4. On both sides of the locking arms,the button turn
into green safety color.
* The insert guides make it easier to install the
child safety seat with the aid of the ISO-FIX
attachment points and prevent damage to the
seat covering. When not in use, they should be
removed and stored in a safe place. On vehicles
with a folding backrest the insert guides must be
removed before the backrest is folded.Any
problems which occur are usually caused by dirt or
foreign objects on the insert guides and on the
hooks. Clean of any dirt or foreign objects to
przelotki
punkt
zaczepienia
Klik
instruction
instruction
7.Instruction
Please read the chapter with your desired installa-
tion method in chapter first.
0-36kg
1. If your vehicle is not equipped with the ISO-FIX
insert guides as standard, clip the two insert guides
which are included with the seat
* With the cut-out facing upwards onto the two
ISO-FIX attachment points of your vehicle.
TIP:
The ISO-FIX attachment points are located
between the surface and the backrest of the vehicle
seat.
2. Move the head restraint on the vehicle seat to the
upper position.
3. Pull out the ISO-FIX adjuster to pull out both
locking arms,from the under of base pull the
locking arm to and fro until you hear a
CLICK
sound
which indicates they are fully engaged.
4. On both sides of the locking arms,the button turn
into green safety color.
* The insert guides make it easier to install the
child safety seat with the aid of the ISO-FIX
attachment points and prevent damage to the
seat covering. When not in use, they should be
removed and stored in a safe place. On vehicles
with a folding backrest the insert guides must be
removed before the backrest is folded.Any
problems which occur are usually caused by dirt or
foreign objects on the insert guides and on the
hooks. Clean of any dirt or foreign objects to
przelotki
punkt
zaczepienia
Klik
instruction
instruction
7.2 Group1(9-18kg) installed in the forward
facing position with 5 point ISO-FIX-
+vehicle belt
7.2.1 Make sure that the child seat’s 5-point
harness is installed correctly
7.2.2 Place the child seat facing in the
direction of travel on the vehicle seat.
7.2.3 Pull out the ISO-FIX locking arm from the
under of base.
7.2.4 Grasp the child seat with both hands and
slide the two locking arms into the insert
guides until the locking arms engage with a
CLICK
noise on both sides. The green safety
button must now be visible on both sides.
CAUTION!
The locking arms are only correctly
engaged if both of the safety buttons are
completely green.
7.2.5 Shake the child safety seat to make sure
it is safely attached and re-check the green
safety buttons to make sure that both of them
are completely green.
0-36kg
7.1 Group 0 +(0-13kg) installed in the
rearward facing position with 5 point harness
+ vehicle belt
7.1.1 Pull the vehicle seat belt and pass the lap
belt section through the red belt guidance and
under the sleeping cushion.
7.1.2 Pass the diagonal seat belt section
through the blue guidance on the back of the
child seat.
7.1.3 Fasten the seat belt and pull it tight,en-
sure that the seat belt is not twisted.
Note:
1.The child seat must only be installed in the
rearward facing position and angle of
maximum inclination(Fourth level).For be sure
the car seat has been installed in the right
place,please shake it before use.
2.Don not twist the belt!
3.Ensure the buckle tongues engage in the
vehicle seat buckle,you will hear an audible
CLICK!
Pas barkowy
Pas biodrowy
Pas biodrowy
Pas barkowy
