48
49
6.8 Adjust the length of harness
In order to protect your child much better,after fix him/her in the child restraint
system and lock the buckle,you should tighten the harness so they are snug and flat
against the child’s body,they should never be twisted or loose.
6.8.1 To tighter the harness,pull the shoulder belt upwards to remove the slack from
the lap sections of the harness,at the same time to pull the adjuster crotch belt
coming from the lock by your another hand.
6.8.2 To lengthen the harness,press the button on lock between the child’s two leg,
then pull the two shoulder belt simultaneously in your direction, please note while
you are doing this hold the harness,not the harness cover.
CAUTION! Check that the harness straps are not twisted and that they have been
correctly inserted in the belt slots on the cover.
instruction
instruction
6.8 Adjust the length of harness
In order to protect your child much
better,after fix him/her in the child restraint
system and lock the buckle,you should tighten
the harness so they are snug and flat against
the child’s body,they should never be
twisted or loose.
6.8.1 To tighter the harness,pull the shoulder
belt upwards to remove the slack from the lap
sections of the harness,at the same time to
pull the adjuster crotch belt coming from the
lock by your another hand.
6.8.2 To lengthen the harness,press the button
on lock between the child’s two leg,then pull
the two shoulder belt simultaneously in your
direction, please note while you are doing this
hold the harness,not the harness cover.
CAUTION!
Check that the harness straps are
not twisted and that they have been correctly
inserted in the belt slots on the cover.
0-36kg
6.9 Adjust the height of harness
A correctly adjusted harness ensures that the
diagonal seat belt section is optimally
positioned, and gives your child the optimal
protection.
The harness must be adjusted to that there is
a space two fingers wide between the harness
and your child’s body.
To adjust the height of the harness to fit your
child:
6.9.1Loosening the shoulder belt in order to
access the metal link and connector at the
back of the child seat.
6.9.2 Remove the belt from connector, then
remove the shoulder belt from the metal
link,follow step①②③,④⑤
6.9.3 From the front of the child seat,
re-thread shoulder belt through the desired
slots.Make sure both of the belts go through
the slots at the same height.
6.9.4 Connector both shoulder belt to the
connector and metal link again.Follow step
③②①,④⑤
instruction
instruction
6.8 Adjust the length of harness
In order to protect your child much
better,after fix him/her in the child restraint
system and lock the buckle,you should tighten
the harness so they are snug and flat against
the child’s body,they should never be
twisted or loose.
6.8.1 To tighter the harness,pull the shoulder
belt upwards to remove the slack from the lap
sections of the harness,at the same time to
pull the adjuster crotch belt coming from the
lock by your another hand.
6.8.2 To lengthen the harness,press the button
on lock between the child’s two leg,then pull
the two shoulder belt simultaneously in your
direction, please note while you are doing this
hold the harness,not the harness cover.
CAUTION!
Check that the harness straps are
not twisted and that they have been correctly
inserted in the belt slots on the cover.
0-36kg
6.9 Adjust the height of harness
A correctly adjusted harness ensures that the
diagonal seat belt section is optimally
positioned, and gives your child the optimal
protection.
The harness must be adjusted to that there is
a space two fingers wide between the harness
and your child’s body.
To adjust the height of the harness to fit your
child:
6.9.1Loosening the shoulder belt in order to
access the metal link and connector at the
back of the child seat.
6.9.2 Remove the belt from connector, then
remove the shoulder belt from the metal
link,follow step①②③,④⑤
6.9.3 From the front of the child seat,
re-thread shoulder belt through the desired
slots.Make sure both of the belts go through
the slots at the same height.
6.9.4 Connector both shoulder belt to the
connector and metal link again.Follow step
③②①,④⑤
instruction
instruction
6.6 Removing the fabric cover
6.6.1 Removing the cover of the headrest
A) Removing the 5-point harness
Take off the cover from backrest and base.
B) Headrest
1. Move the headrest of the child seat to the upper
position.
2. Take off the cover from belt holder of headrest
first,then remove the cover of the headrest.
6.6.2 Re-fitting the Cover
Simply follow the steps in the opposite way.
CAUTION!
Never use the child seat in installation
without a correct installed buckle.
Make sure that the metal plate is correctly attached.
CAUTION!
Check that the harness straps are not
twisted and that they have been correctly inserted in
the belt slots on the cover.
6.7 Adjust the angle of child safety car seat
There has 4-level adjustment in the child
safety car seat.
Before fixing a child in the child restraint
system,the seat must be set on the recline
position for rear-facing use,see picture ④ or in
the siting position for forward-facing use,see
picture①②③
To achieve that,use the recline handle
located in front of the child restraint system
between the sitting part and the base to
adjust the desired position.
Total has four level positions:
①first level ②second level
③third level ④ the fourth level
0-36kg
6.5.8 Grasp the metal plate from underneath and
turn it into a vertical position.Push upwards and
slide the metal plate through the slot.
6.5.9 Remove the harness buckle with the crotch
pad and store it in the storage bag.
Only forward facing
Only forward facing
Only forward facing
Only rear facing
