B9Creations B9 Scan 500, Руководство по эксплуатации

Страница: 41 / 54

B9 Scan 500 Operating Manual Page41
11.2. FUSES REPLACING
B9 Scan 500 is provided with 2 x T5A 250V fuses integrated in the rear AC On\Off switch to
overcurrent protection. To replace them remove with a small screwdriver the fuse plastic
cap.
DISCONNECT FROM MAINS
•
Always disconnect the equipment from electrical power before removing a fuse; not doing
so may result in serious injury.
WARNING
•
Always replace a fuse with an identical type, and never substitute a fuse with foil or an-
other object
. This could lead to electrocution and fires.
•
Do not keep replacing a fuse if it blows immediately after you replace it . In these in-
stances, ask for help either from E.G.S. srl service agents or by personnel adequately
trained by E.G.S. srl.
11.3. SOFTWARE UPDATE
The B9 Scan is provided with an automatic update system. See the B9 Scan User's Guide
manual for further details. Double click on the B9 Scan icon on the desktop, select
Main menu -> User Guide.