Azbil MCB10A, Руководство пользователя

Страница: 51 / 114

Azbil Corporation Operation using the data setting device
Model MCB10A 5-3
5-1-1 : Display and operation contents of data setting device
Overview of mode
This system provides the following four modes available in accordance with the
operations:
Mode Description
MEASURING MODE Mode that shows measuring status.
OPERATOR’S MODE Mode that is set for the operator. This mode is
comprised of setting and configuration of data that are
set or changed frequently during startup.
[Damping constant, auto zero adjustment, counter
reset, counter preset value, etc.]
CAUTION
Set or changed data are temporarily written into
the memory. Note that if the configured data
are not saved/written into the memory within
10 minutes, the configured data returns to the
previous values.
Be sure to press the MODE key to return to the
MEASURING MODE and to save data.
ENGINEERING MODE In the set mode for engineering, the mode is comprised
of data that is set or changed less frequently than the
data in “OPERATOR'S MODE.”
[ID, function selection, detector data, flow rate range,
hysteresis width, pulse data, low flow cut, selecting
false mode for output, etc.]
CAUTION
• When the mode is changed to MEASURING
MODE by pressing the MODE key, the set/
changed data are saved into a non-volatile
memory. Be sure to press the MODE key to
save the configured data.
• Set or changed data are temporarily written
into the memory. Note that if the configured
data are not saved/written into the memory
within 10 minutes, the configured data returns
to the previous values. Be sure to press the
MODE key to return to the MEASURING
MODE and to save data.