UNIX
Section 8: Setting Up - UNIX
AXIS 5600+ User’s Manual
80
Section 8 Setting Up - UNIX
Installation in the UNIX Environment
Having performed the basic TCP/IP setup procedures as defined in
Assigning an IP address
, on page 23 and onwards, you are now able to
print in interactive mode using LPR, FTP or Reverse Telnet protocols.
However, should you require to integrate the AXIS 5600+ into your
host spooler, you can use the Axis automatic installation script
axinstall.
This utility software is resident on the AXIS 5600+ and can
be downloaded to your host using FTP, so no disks are required. The
axinstall
script can also be downloaded from the Axis
Communicationws web site
http://www.axis.com/
and on the AXIS
Product CD.
Having completed this operation, the printer connected to the AXIS
5600+ will appear as though they are directly connected to the host
printer spooler.
If you intend to operate your AXIS 5600+ in a multiprotocol
environment, you should also proceed according to one or more of the
following sections, as appropriate to your network.
Section 5 Setting Up - NetWare
, on page 54
Section 4 Setting Up - Windows
, on page 34
Section 6 Setting Up - OS/2
, on page 68
Section 7 Setting Up - Macintosh
, on page 74
