Ne
tW
ar
e
UNIX
Wi
n
d
ow
s
OS
/2
Ma
ci
ntosh
Section 3: Basic Installation
AXIS 5600+ User’s Manual
32
Setting the print
server’s IP adderss
using BOOTP
in UNIX
Follow the instructions below to set the IP address using BOOTP:
1. Append the following entry to your boot table. This is typically
performed by editing the file:
/etc/bootptab
Example:
Notes:
❏
Enter the
ht
and
vm
fields exactly as shown in the example.
❏
The
ha
field is the Ethernet address/node address and the
ip
field
is the IP address of your AXIS 5600+.
❏
The
gw
and
sm
fields correspond to the default router address and
subnet mask.
❏
If the host name has not been mapped to an IP address, simply
replace the host name entry with the IP address in the example
above.
2. If necessary, update your host table and alias name databases, as
required by your system.
3. If it is not already running, start the BOOTP daemon. This is
typically performed using the
bootpd
command.
4. Restart the AXIS 5600+ to download the IP address, default
router address, and subnet mask.
The AXIS 5600+ can automatically download a customized config file
from a TFTP server. Just add the name of the config file and the
TFTP server’s IP address to your boot table. The config file is
downloaded immediately after the AXIS 5600+ receives its IP address.
<host name>:ht=<hardware type>:vm=<vendor magic>:\
:ha=<hardware address>:ip=<IP address>:\
:sm=<subnet mask>:gw=<gateway field>
npsname:ht=ether:vm=rfc1048:\
:ha=00408c100086:ip=192.168.3.191:\
:sm=255.255.255.0:gw=192.168.1.1
