Ma
ci
ntosh
Section 7: Setting Up - Macintosh
AXIS 5600+ User’s Manual
78
Setting Parameters
In AppleTalk, you can change a limited number of the parameters of
the AXIS 5600+. You can:
•
enable and disable binary data transfers for your printing
•
select the type of binary transfer protocol to use
•
specify the AppleTalk printer type
•
set the IP address
However, by assigning an IP address to your AXIS 5600+, you have
access to all of print server’s parameters via any standard Web browser
or via FTP. Refer to
Section 9 Management & Configuration
, on page
96 for more information.
Example:
The following example describes the how you set the AXIS 5600+
parameters in AppleTalk.
Important:
DO NOT use the parameter values from this example when
configuring your AXIS 5600+. You should select values that are
appropriate for your printers and network settings.
Follow the instructions below:
1. Open the Chooser.
2. Select a network printer driver, any LaserWriter will do.
3. Select the printer port which name ends with "_CFG".
4. Close the Chooser.
5. Open a text editor, e.g. SimpleText.
