Ne
tW
ar
e
UNIX
Wi
n
d
ow
s
OS
/2
Ma
ci
ntosh
Section 11: Upgrading the Software
AXIS 5600+ User’s Manual
142
2. Select a network group from the drop-down list. You can only
update the servers that are included in the selected network group.
3. All AXIS servers included in the network group appear. Click the
Firmware
button to start the Upgrade Wizard.
4. Follow the instructions that are presented to you to complete the
installation.
Refer to
Using AXIS ThinWizard
, on page 102, for more information
about AXIS ThinWizard.
Upgrading over the
Network using FTP
To upgrade over the network using FTP you will need the file with the
new print server software. The name of this file is in the form
product_version.bin
, e.g.
5600+_620.bin
for software release
6.20. You can use any of the previously mentioned methods to obtain
the new file.
You must assign the AXIS 5600+ with an IP address, as described in
Assigning an IP address,
on page 23, before you can use this upgrading
method.
Follow the procedures below to upgrade the AXIS 5600+:
Caution
❏
Be careful not to interrupt the file transfer. If the transfer is
interrupted the AXIS 5600+ may have to be re-initialized by your
dealer.
1. Log in to the AXIS 5600+ with the command:
ftp <host name>
, or
ftp <IP address>
2. You will be prompted for user id and password. Use the user id
root
, which has the default password
pass
.
3. Type the command:
binary
to change to binary transfer mode.
