Wi
n
d
ow
s
Section 4: Setting Up - Windows
AXIS 5600+ User’s Manual
36
Client-Server Printing
AXIS Print System needs only to be installed on one server to perform
client-server printing. The installed printers must be configured to be
shared to allow clients to use them. Pop-up messages should not be
enabled on the server, as they will not be displayed on the client
platforms.
TCP/IP Printing in Windows 95 , 98, NT and 2000
Install AXIS Print System ver. 1.20 on your Windows 95, 98, NT or
2000 client, if you have not already done so. This software can be
downloaded from the AXIS Product CD or from the Axis web
http://www.axis.com.
To enable printing in the TCP/IP
environment, you must ensure that the TCP/IP protocol is enabled on
your client.
Set the print server’s
IP address
See
Assigning an IP address
, on page 23.
Add a printer to ’My
Printers'
The network printers and Axis print servers that are available in your
network are displayed in the
Available Printers/Print Servers
window.
Only printers connected to Axis print servers with firmware versions
6.00 or higher will appear in the
Available Printers/Print Servers
window.
Follow these instructions to add a network printer to
My Printers
:
1. Select the
Available Printers/Print Servers
tab.
2. Select the network printer you wish to add to your
My Printer
list
and click the
Add to My Printers
button or select
Add (Typical)
to My Printers
from the
Printer
menu. The AXIS Print System
Add Printer Wizard will start. Follow the instructions given on
the screen in order to install an appropriate driver.
