Wi
n
d
ow
s
Section 4: Setting Up - Windows
AXIS 5600+ User’s Manual
40
Installing
NetBIOS/NetBEUI
printers in
Windows 95/98
Follow the procedures below to install Axis NetBIOS/NetBEUI
printer ports on a Windows 95/98 workstation, using the AXIS Print
System:
1. To start the Add Printer Wizard, select
Settings - Printers
from
the
Start
menu and double-click the
Add Printer
icon.
2. After clicking
Next>
in the first dialog, the Wizard asks you to
select Local printer or Network printer. Select
Local printer
as the
AXIS 5600+ emulates a local printer port. Click
Next>
.
3. Choose the appropriate printer driver for your printer. If the
desired printer driver appears in the displayed Manufacturers and
Printer Models lists, highlight your selection, click
Next>
and
proceed directly to step 6. It is only necessary to perform steps 4 -
5 if your printer does not appear in the model list.
Note:
❏
Even if the desired printer is available in the
Manufacturers and
Printer Models
list, you are advised to use the printer driver
provided with the printer. This assures you of the latest driver
software.
4. Click the
Have Disk...
button. Insert the printer driver
diskette/CD that was provided with your printer, select the
appropriate diskette/CD drive and click
OK
.
5. Select the printer driver you want to install and click
Next>
.
6. Select the AXIS Printer Port from the Available Ports list. The
port names appear as <name>.LP1, <name>.LP2, and
<name>.CM1, where <name> is AX followed by the last six digits
of the AXIS 5600+ serial number, e.g. AX100086 (default serial
no.). Click the
Configure Port
button.
7. Choose whether error condition pop-up messages are to be
displayed by checking the box in the
Configure AXIS Ports
dialog. Define the frequency at which the error messages should
be displayed after retry. Click
OK>
.
8. Enter an appropriate name for your printer and click
Next>
.
9. Choose whether you wish to produce a test page and click
Finish
.
