7
AXIS 241Q/S/QA/SA - Product Description
Control Button
- Press this button to restore the factory default settings, as described in
Resetting to the Factory Default Settings,
on page 46, or to install using AXIS Internet
Dynamic DNS Service (page 16).
Video Inputs
- Accommodates up to 4 separate video sources (VIDEO 1 - VIDEO 4)
simultaneously. Each supported video input is connected using a coax/BNC connector.
Physical connections made using e.g. 75 Ohm coax video cable have a recommended
maximum length of 800 feet (250 meters).
Line Out
(AXIS 241QA only) - Mono audio output (line level), which can be connected to a
public address (PA) system or an active speaker with a built-in amplifier. A pair of
headphones can also be attached.
Line/Mic In
(AXIS 241QA only) - One 3.5mm input for a mono microphone, or for line-in
mono signal (only the left channel is used from a stereo signal).
AXIS 241S/SA Front Panel
Indicators
- After completion of the startup and self test routines, the multi-colored
Network, Status, Power Indicators flash as follows:
Network
Amber
Flashes for activity on a 10 Mbit/s network
Green
Flashes for activity on a 100 Mbit/s network
Red
Flashes rapid red for hardware error, together with the Status indicator
None
No connection
Status
Green
Normal operation
Amber
Flashes during reset to factory default or at firmware upgrade
Red
Flashes rapid red for a hardware error, together with the Network indicator
Power
Green
Normal operation
Amber
Flashes green/amber during upgrade
AXIS 241S
AXIS 241SA
