46
AXIS 241Q/S/QA/SA - System Options
Resetting to the Factory Default Settings
To reset the Video Server to the original default settings, go to the
System Options >
Maintenance
web page (described in
, on page 44) or use the control button
on the Video Server, as described below:
Using the Control Button
Follow the instructions below to reset the Video Server to the factory default settings using
the Control Button.
1. Switch off the Video Server
by disconnecting power.
2. Press and hold the Control
button while reconnecting the
power.
3. Keep the Control button
pressed until the
Status
Indicator
displays yellow (this
may take up to 15 seconds).
4. Release the Control button.
5. When the Status Indicator changes to Green (may take up to 1 minute), the
process is complete and the Video Server has been reset.
6. Re-install the Video Server, as described in the Installation Guide.
Control Button
Status Indicator
