AXIOMTEK STX88810VEA, Руководство пользователя

Страница: 62 / 78

STX88810 STX Evaluation Platform Module Series User’s Manual
Award BIOS Utility
54
7.8 PNP/PCI Configuration
This section describes configuring the PCI bus system. PCI, or
Personal Computer Interconnect, is a system which allows I/O
devices to operate at speeds nearing the speed the CPU itself uses
when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that
only experienced users should make any changes to the default
settings.
CMOS Setup Utility-Copyright © 1984-2001 Award Software
PnP/PCI Configurations
Reset Configuration Data Disabled Item Help
Menu Level f
Resources Controlled By Auto (ESCD)
► IRQ Resources Press Enter Select Yes if you are
using a Plug and play
capable operating
system select No if
PCI/VGA Palette Snoop Disabled you need the BIOS to
configure non-boot
devices
ÇÈÆÅ
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
z
PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play aware
(e.g., Windows 95). The default value is
“No”
.
z
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup or if you have
installed a new add-on and the system reconfiguration has caused such a
serious conflict that the operating system can not boot. The options
available are Enabled and Disabled.