AXIOMTEK STX88810VEA, Руководство пользователя

Страница: 60 / 78

STX88810 STX Evaluation Platform Module Series User’s Manual
Award BIOS Utility
52
z
Standby Mode
After the selected period of system inactivity (1 minute to 1 hour), the
fixed disk drive and the video shut off while all other devices still operate
at full speed. The default value is
“Disabled”
.
Disabled
System will never enter STANDBY mode
1/2/4/6/8/10/20/
30/40 Min/1 Hr
Defines the continuous idle time before the system
entering STANDBY mode.
If any item defined in (J) is enabled & active,
STANDBY timer will be reloaded
z
Suspend Mode
After the selected period of system inactivity (1 minute to 1 hour), all
devices except the CPU shut off. The default value is
“Disabled”
.
Disabled
System will never enter SUSPEND mode
1/2/4/6/8/10/20/
30/40 Min/1 Hr
Defines the continuous idle time before the system
entering SUSPEND mode.
If any item defined in (J) is enabled & active,
SUSPEND timer will be reloaded
z
HDD Power Down
After the selected period of drive inactivity (1 to 15 minutes), the hard disk
drive powers down while all other devices remain active. The default
value is
“Disabled”
.
Disabled
HDD’s motor will not power OFF.
1/2/3/4/5/6/7/8/
9/10/11/12/13/1
4/15 Min
Defines the continuous HDD idle time before the
HDD enters power saving mode (motor OFF)
z
Throttle Duty Cycle
When the system enters Doze mode, the CPU clock runs only part of the
time. You may select the percent of time that the clock runs. The default
value is
“62.5%”
.
z
VGA Active Monitor
When Enabled, any video activity restarts the global timer for Standby
mode. The default value is
“Enabled”
.