AXIOMTEK STX88810VEA, Руководство пользователя

Страница: 58 / 78

STX88810 STX Evaluation Platform Module Series User’s Manual
Award BIOS Utility
50
z
ACPI Function
This item allows you to enable/disable the Advanced Configuration and
Power Management (ACPI). The options available are Enabled, Disabled.
z
Power Management
This option allows you to select the type (or degree) of power saving for
Doze, Standby, and Suspend modes. The table below describes each
power management mode:
Max Saving
Maximum power savings. Only Available for SL CPUs.
Inactivity period is 1 minute in each mode.
User Define
Sets each mode individually. Select time-out periods in the
PM Timers section, following.
Min Saving
Minimum power savings. Inactivity period is 1 hour in each
mode (except the hard drive).
Disabled
Default value
z
PM Control by APM
If Advanced Power Management (APM) is installed on your system,
selecting Yes gives better power savings. The default value is
“Yes”
.
No
System BIOS will ignore APM when power managing the system
Yes
System BIOS will wait for APM’s prompt before it enters any PM
mode (i.e., DOZE, STANDBY or SUSPEND).
Note: If APM is installed or if there is a task running, even when the
timer has timed out, the APM will not prompt the BIOS to put
the system into any power saving mode
!
NOTE:
If APM is not installed, this option has no effect.