AXIOMTEK STX88810VEA, Руководство пользователя

Страница: 47 / 78

STX88810 STX Evaluation Platform Module Series User’s Manual
Award BIOS Utility
39
z
Swap Floppy Drive
This allows you to determine whether to enable Swap Floppy Drive or not.
When enabled, the BIOS swap floppy drive assignments so that Drive A
becomes Drive B, and Drive B become Drive A. By default, this field is
set to
Disabled.
z
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive type, 40 or 80
tracks, installed in the system. 360Kb type is 40 tracks while 720Kb,
1.2MB and 1.44MB are all 80 tracks. The default value is
“Enabled”
.
Enabled
BIOS searches for floppy disk drive to determine if it is 40 or
80 tracks. Note that BIOS can not tell from 720K, 1.2M or
1.44M drives type as they are all 80 tracks.
Disabled
BIOS will not search for the type of floppy disk drive by track
number. There will be no warning message displayed if the
drive installed is 360K.
z
Boot Up NumLock Status
This option enables and disables the number lock function of the keypad.
The default value is
“On”
.
On
Keypad functions confine with numbers
Off
Keypad functions convert to special functions (i.e., left/right
arrow keys)
z
Gate A20 Option
The default value is
“Fast”
.
Normal
The A20 signal is controlled by keyboard controller or
chipset hardware.
Fast
Default: Fast. The A20 signal is controlled by Port 92 or
chipset specific method.
z
Typematic Rate Setting
This determines the typematic rate of the keyboard. The default value is
“Disabled”
.
Enabled
Enable typematic rate and typematic delay programming
Disabled
Disable typematic rate and typematic delay programming.
The system BIOS will use default value of these 2 items and
the default is controlled by keyboard.
z
Typematic Rate (Chars/Sec)
This option refers to the number of characters the keyboard can type per
second. The default value is
“6”
.
6
6 characters per second