AXIOMTEK STX88810VEA, Руководство пользователя

Страница: 55 / 78

STX88810 STX Evaluation Platform Module Series User’s Manual
Award BIOS Utility
47
z
POWER ON Function
This option allows users to select the type of power ON sequence for the
system to follow. The default value is
“Button-Only”
.
BUTTON-ONLY
Follows the conventional way of turning OFF system power (via
power button).
Password
Upon selecting this option, the KB POWER ON Password line
appears. Press <Enter> and you’ll be prompted to enter and
confirm a password of your choice.
After setting the password, succeeding attempts to power ON
the system will result to null. For system to activate, user must
input the password via keyboard then press <Enter>.
Hot KEY
This option is very similar with that of Password. Hot-key
combinations range from Ctrl-F1 to Ctrl-F12. User may define
this combination from the Hot key Power ON option.
z
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed
on the system board and you wish to use it. If you install and-in FDC or
the system has no floppy drive, select Disabled in this field. The options
available are Enabled, Disabled.
z
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and second
serial ports. The options available are 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4,
2F8/IRQ3, Disabled, Auto.
z
UART2 Duplex Mode
The second serial port offers these infrared interface modes:
¾
IrDA
¾
ASKIR IrDA-compliant serial infrared port
¾
Normal (default value)
NOTE:
The UART Mode Select will not appear on the menu
once you disable the setting of Onboard Serial Port 2.
When UART Mode Select is set as ASKIR or IrDA, the options RxD, TxD
Active and IR Transmittion delay will appear.