AXIOMTEK STX88810VEA, Руководство пользователя

Страница: 24 / 78

STX88810 STX Evaluation Platform Module Series User’s Manual
Hardware Description
16
4.8 Connectors
The connectors on the
STX88810
allow you to connect external
devices such as keyboard, floppy disk drives, hard disk drives,
printers, etc. The following table lists the connectors on
STX88810
and their respective functions.
Connectors Label
STX base board Connector
P1
STX base board Connector P2
IDE2 from STX module FC1
DVOC connector
FC3
Hirose 30pin LVDS connector
FC4
DDR SO-DIMM
DIMM1
4.8.1
STX Connector
: P1, P2
This chapter provides a detailed description of STX Interface signals.
The signals are arranged in functional groups according to their
associated interface. All signals are de-scribed from STX Module
point of view for example,
input
means direction
from
the STX
Baseboard
to
the STX Module.
The following table shows pins arangement of either P1, P2 plug
(used on STX Module) or J1, J2 receptacle (used on STX Baseboard).
Table 1. STX Signal Groups
Signal Group Group Description Pins Count
PCI
PCI Bus 65
ISA
ISA Bus 88
E-IDE
E-IDE Interface 28
FDD Floppy Disk Drive Interface 15
PPI
Parallel Port Interface 17
SPI1
Serial Port 1 Interface 8
SPI2 Serial Port 2 Interface 8
IrDA IrDA Interface 2
KB/MS
Keyboard and PS/2 Mouse Signals 4
USB1
Universal Serial Bus 1 Interface 3
USB2 Universal Serial Bus 2 Interface 3
USB3
Universal Serial Bus 3 Interface 2
USB4
Universal Serial Bus 4 Interface 2
ETH
Ethernet 10/100Mbit Interface 6
AC’97 Audio Codec ‘97 Interface 5
To be continued…