AXIOMTEK DASP-52282, Руководство пользователя

Страница: 25 / 59

DASP-52282 Card User’s Manual
Hardware Installation
19
2.5 Quick setup and test
To install a new DASP-52282 into an IBM PC compatible
computer, at first, power-off the PC and open its chassis, then
plug the DASP-52282 into a PCI slot. To fully benefit from the
high data transfer efficiency of DASP-52282 during data
acquisition, it is recommended not to install your DASP-52282 at
the first PCI slot beside the AGP slot of the mainboard of PC.
(The first PCI slot beside the AGP slot always shares the same
IRQ with AGP device.) Based on the same consideration, please
ensure that (the BIOS setting of) your PC has released enough
IRQ resources for PCI devices. Do not share the same IRQ of
DASP-52282 with other devices. The DASP-52282 is a plug and
play device for MS Windows, and the OS will detect your
DASP-52282 after you power on the PC. The detail of driver and
software installation is described in software manual of
DASP-52282.
After the hardware and software installation, user can emulate
and test DASP-52282 step by step as follows.
Launch the ‘PCI Configuration Utility’ of
DASP-52282 to ensure that the resource of
DASP-52282 is properly dispatched by the OS.
Press the scan button in the toolbar of ‘PCI
Configuration Utility’ to find the installed
DASP-52282, and then check the resource list as
show in following figure.
Scan DASP-52282 with PCI Configuration Utility and Check the
Dispatched Resource
Check the dispatched resource of DASP-52282, take care the
IRQ resource especially.