Axel GENIUS D Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 58

Axel GENIUS D Скачать руководство пользователя страница 52

APPENDIX

E - FIRMWARE UPGRADE PROCEDURE

| APPENDIX E - FIRMWARE UPGRADE PROCEDURE

17 APPENDIX E - FIRMWARE UPGRADE PROCEDURE

Genius  D  leaves  the  manufacturer  with  the  latest  firmware  installed  just  prior  to  shipment.  Once
purchased, the firmware can be updated with the latest version available. The Firmware Upgrade
can be run in the Windows work environment. Supported operating  systems include: Windows Xp
Sp3, Windows Vista e Windows 7 Ultimate 32/64 Bit. Ensure you have installed  Microsoft .net 4 on
the operating system. Where this is not the case, visit the site

www.microsoft.com

for installation.

In order to upgrade the processor, please follow this procedure:

After initialisation of the device (firmware upgrade), all the settings and adjustments of the user
may be deleted and/or overwritten by the new settings of the manufacturer! Please save the
current configuration in a document external to the device before proceeding with the firmware
update.

During the firmware update, do not forget to install the new version of the software associated
with  remote  control  of  the  PC.  There  is  a  direct  correspondence  between  the  firmware  and
software  versions.  For  example,  version  3.0  of  the  Pc  software  requires  firmware  version  3.0
installed  on  the  unit  and  vice  versa.  More  precisely,  the  first  two  digits  must  match  as  far  as
possible  the  sub-versions  (identified  by  the  third  digit)  that  are  not  involved  in  the
firmware/software compatibility.

As a general rule, the

X. Y. Z

software version is performed with the

X. Y K firmware version.

17.1 PREPARATION OF THE UNIT FOR UPGRADE

To correctly run the upgrade of a Genius D device, a Serial COM RS232 type port must be used. If the port is native on
the motherboard of the pc from which you are working you do not need to set the port characteristics, while if you are
using USB-to-Serial adapters, in some cases you may need to set certain port data such as speed and stop bit. The
software upgrader works with port values:

38.400bps, 8-N-1

Below are these step-by-step instructions to proceed correctly to the upgrade:

a.

Close all applications open on the PC.

b.

Navigate to the Fw Upgrades folder.

c.

Click twice on the file associated with the upgrade to be performed.

d.

Launch the program _Upgrader_V2xx.EXE.

«
...
50
51
52
53
54
...
»

Содержание GENIUS D



























































Отзывы:

Нет отзывов