Axel GENIUS D Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 58

Axel GENIUS D Скачать руководство пользователя страница 39

DETAIL

OF AUDIO CHANGEOVER REMOTER

| DETAIL OF AUDIO CHANGEOVER REMOTER

14.8.3 General Purpose I/O Section

In this section are set the features of General Purpose both in Input and in Output. GP Inp means the features that must
be performed by Genius D upon receipt of a GPIn on port 1,2,3 or 4.
These are possible for the GP In:

a.

DTMF CMD1:

Upon closure of GPIn 1, the DTMF CMD1 string present in the DTMF Generator panel

is launched,

b.

DTMF CMD2:

Upon closure of GPIn 2, the DTMF CMD1 string present in the DTMF Generator panel

is launched.

c.

DTMF CMD3:

Upon closure of GPIn 3, the DTMF CMD1 string present in the panel DTMF Generator

panel is launched.

d.

DTMF CMD4:

Upon closure of GPIn, 4 the DTMF CMD1 string present in the DTMF Generator panel

is launched.

e.

INP TO ON ANOUT:

Changes of the input with respect to the Analog audio output.

f.

INP B ON ANOUT:

Changes of the input with respect to the Analog audio output.

These are possible for the GP Out:

a.

ALARM :

the condition of Alarm occurs when Genius D has not been able to perform the switch settings.

Where a switch is not effected, Genius D displays the Alarm indication on the front panel, in the control software
the corresponding LED is lit and the GPO is possibly closed.

b.

DTMF FUN1:

When a DTMF string is correctly decoded, it

coincides with the closing of the corresponding GPO

c.

DTMF FUN2

: When a DTMF string is correctly decoded, it

coincides with the closing of the corresponding GPO

d.

DTMF FUN3

: When a DTMF string is correctly decoded, it

coincides with the closing of the corresponding GPO

e.

DTMF FUN4

: When a DTMF string is correctly decoded, it

coincides with the closing of the corresponding GPO

f.

INPUT A ON ANOUT

: This GPO goes to (1) when input -

A is valid and is on the Analog output

g.

INPUT B ON ANOUT:

This GPO goes to (1) when the

input -B is valid and is on the Analog output

«
...
37
38
39
40
41
...
»

Содержание GENIUS D



























































Отзывы:

Нет отзывов