Axel GENIUS D Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 58

Axel GENIUS D Скачать руководство пользователя страница 5

ENG

| INTRODUCTION

MAIN DESCRIPTION

Genius D is a fully digital audio changeover, designed for Radio and TV broadcast marketplace.

Genius D allows to connect 2 analog input sources, main and backup, and constantly check the main audio presence. In
case  of  fault,  Genius  D  switch  the  input  source  from  main  to  backup.  The  intervention/return  time  are  configurable  via
software. The input source switch can be automatic or manual via front panel, software or GPIn.

The  audio  process  is  fully-digital  via  DSP,  and  a  special  section  is  dedicated  to  audio  control;  the

Denoiser

module

cleans the sound from unwanted noise. A special highlight: the

Tone Generator

provides a test tone, usefull to trim an

audio network chain. DTMF Encoder and Decoder are also available with customizable strings that can be interfaced
with radio and tv automation system.

In the Genius D’s front panel a big graphic display shows all the inputs/output analog level and the alarms. Three buttons
change the working status: from automatic to manual with input source forcing.

Inputs and Output are balanced analog over XLR connector installed in Genius D’s rear panel. Remote connections to
Genius D are capable via USB port and serial port. A GPIO port featured with open collector and optocoupler states the
Genius D working status, the alarm or the commands coming from the DTMF Decoder.Universal power supply worldwide
used. Genius D occupy 1 standard 19” rack unit.

«
...
3
4
5
6
7
...
»

Содержание GENIUS D



























































Отзывы:

Нет отзывов