DETAIL
OF AUDIO CHANGEOVER REMOTER
| DETAIL OF AUDIO CHANGEOVER REMOTER
14.4 GP INPUTS AND GP OUTPUTS SECTION
In the GPInputs and GPOutputs sections, the status of the General Purpose
in Input and Output is visible. The SubD 15poly HD female port on the rear of
the device allows connections with the device. See the technical appendix for
connections and pinout. The purpose of this front panel is to show the status
of the various GP In and GP Out. The user cannot act to change the status of
the GP from this panel.
From the Genius D front panel it is however possible to see and learn the
status of the GP Inputs and GP Outputs directly from front panel where the
two lines show the status of
G-INP
: 0-0-0-0
G-OUT
: 0-0-0-0
14.5 DTMF GENERATOR AND DECODER SECTION
The DTMF Generator and Decoder section displays the three important Genius D
work parameters :
Alarm
,
DTMF Generator
e
DTMF Decoder
.
Alarm:
This alarm is displayed when the Genius D operating condition is
alarmed; an example could be when all the switchings available are terminated,
and there are no more input sources to send on an output available.
DTMF Generator:
this red indication represents the capacity of Genius D to generate
a series of DTMF Tones, with user-customisable strings. The indication only
represents the ability of Genius D to generate DTMF tones, and not that Genius D,
when the DTMF GENERATOR led is lit, is generating DTMF tones.
Essentially, when the DTMF Generator is ENABLED this indication is lit. This control
can be enabled or disabled using Setup -> Settings. The subsequent chapters explain
how to use in their entirety the DTMF Generator and DTMF Decoder.
DTMF Decoder:
this red indication represents the capacity of Genius D to
recognise a series of DTMF Tones, with user-customisable strings. The
indication only represents the ability of Genius D to decode the DTMF
tones, and not that Genius D, when the DTMF GENERATOR led is lit, is
decoding DTMF tones.
Essentially, when the DTMF Decoder is ENABLED this indication is lit.
This control can be enabled or disabled using Setup -> Settings. The subsequent chapters explain how to use the DTMF
Generator and DTMF Decoder in their entirety.
Содержание GENIUS D
