Axel GENIUS D, Руководство пользователя, Страница: 32 / 58

DETAIL OF AUDIO CHANGEOVER REMOTER
| DETAIL OF AUDIO CHANGEOVER REMOTER
CONTROL NAME
FUNCTION
Sensitivity
Input Analog Sensitivity Adjustment. The permitted values range from -12dBu to +12dBu
AGC Speed
Adjustment of the speed of the Automatic Gain Control (AGC). The permitted values range
from Off to +2.00 dB/s in steps of 0.05db/s
AGC Max Gain
Represents the maximum gain that the AGC can introduce in input. The permitted values range
from +1.0 dB to +12.0 dB in steps of 1.0 dB
Input Mode
Represents the working mode of the input stage. Possible options include:
- Stereo
- Mono (Left)
- Mono (Right)
- Mono (Left+Right)
-
Swap (Left/Right)
-
Stereo Inv Right
- Stereo Inv Left
- Swap Inv Right
-
Swap Inv Left
The Stereo-Mono classical modes of working are also completed by test functionality such as
Swap and Stereo Inv, where via INV the phases of the balanced audio signal are reversed
creating or eliminating a possible counter phase and where via Swap Left and Right are
reversed.
Fading Mode
Represents the Fade mode, or mode of transition between one source and another.
Possible options include:
- Fast Switch
- Slow Fading
- Normal Fading
- Fast Fading
Fast Switch means a sudden and rapid switch from one source to another with net switching.
Slow-Normal-Fast Fading instead represent an INITIAL fade switching, i.e. fading in closing
then fading in opening towards the new source just switched.
Check Both
Channels
This checkbox is used to operate the Genius D on both the Left and Right channels, if not
selected Genius D only controls the LEFT+RIGHT (mono) product.
Threshold
This parameter represents the level below which to consider the audio source invalid. In
practice, it is the minimum working threshold of the Changeover. The permitted values range
from -40dB to +12dB
Wait Time
Changeover waiting time that is activated by the Threshold control before switching to a
different audio source . The permitted values range from 01 seconds to 120 seconds.
Return Time
Changeover waiting time before considering the primary source valid again. When the input
level exceeds the <threshold>, for a time equal to or greater than <return time> then the source
is considered valid again and the exchange from backup to primary is performed. It is very
useful when the sources are defined as "dirty" and risk creating in output a continuous ping-