AVProEdge AC-MX-88, Руководство пользователя

Страница: 4 / 51

The AC-MX-88 is an 8x8 HDMI matrix switch that supports HDMI 2.0(a/b), HDCP 2.3, up to 4K video reso-
lution, and up to 18 Gbps bandwidth. This switch allows any source (Blu-ray, UHD Blu-ray, satellite receiver,
game consoles, PCs, etc ... ) to show on any connected displays. This matrix equalizes and amplifies the
output to ensure the HDMI signal transmits through long HDMI cables without losing quality.
Audio Delay is “On-Board” so integrators can manage lip-sync issues before they become a problem. Video
signal management is also possible with built-in scalers. So, if the installation has a couple of older displays,
integrators don’t need to forfeit 4K signals to pass the signal to all of the displays. In addition to scalers,
this matrix supports complete EDID management, allowing maximum flexibility with today’s broad mixture
of sources and displays.
Features
·
HDMI 2.0(a/b)
·
18Gbps Bandwidth Support
·
4K60 4:4:4 Support
·
Full HDR Support (HDR 10 & 12 Bit)
·
Dolby Vision, HDR10+ and HLG Support
·
HDCP 2.3 (and all earlier versions supported)
·
4K > 1080p Down Scalers on each output
·
Advanced EDID Management
·
IR, RS-232 and LAN Control Options
·
Digital Toslink Out (7CH PCM, DD, DTS)
·
Balanced Analog Out (2CH PCM)
·
Audio Delay for Digital & Analog Out
·
HDBaseT Compatibility mode for mixed systems
·
Driver Support For Crestron, C4, RTI, ELAN and more
·
Extracted Audio Now Has 3 Operating Modes. Bound to
Input, Bound to Output, or Independent Matrix
·
Built in Test Pattern on Each Output to Verify Infrastruc-
ture
Whats in the box
·
AC-MX-88 (Matrix Switch)
·
12V Locking Power Supply
·
1 x Ground Strap
·
1 x IR Remote Control (Battery not included)
·
1 x IR Extension Cable
·
8 x 5-Pin 2 Channel Audio Extraction Cables
·
1 x 3 Pin Terminal Connector (For RS232)
·
2 x Rack Ears
·
4 x Rubber Feet
4
Introduction
*3V CR2025 Battery Required For IR Remote Control
Not Included