AVProEdge AC-MX-88, Руководство пользователя

Страница: 34 / 51

34
Front Panel Control - Audio Delay
The AC-MX-88 has an Audio Delay feature built-in. Audio Delay is set on the extracted audio OUT-
PUT (Digital and Analog) of the switch and each can have separate settings. The Audio Delay has 4
controls:
·
UP (Increase Delay)
·
Down (Decrease Delay)
·
MUTE (The audio will be muted)
·
BYPASS (There will be no delay set)
*Delay settings are in increments of 90 milliseconds.
Settings are: 90MS, 180MS, 270MS, 360MS, 450MS, 540MS or 630MS.
Control this feature from the front panel:
1. Press and hold the OUTPUT number for which you want to delay
the audio.
2. The available options will light up (as pictured).
3. Press UP, DOWN, MUTE or BYPASS to control the delay.
4. The current setting will be indicated on the LCD screen.
Audio Matrix Control:
Once in “Matrix” mode for audio, the extracted audio routing on the AC-MX-88 can be controlled
from the front panel:
To Control:
1. Press and hold (3 sec) BYPASS button from the audio settings (top right of machine).
2. Make sure the screen says “Matrix”, if it does not use the UP/DOWN arrow keys to change,
then press the BYPASS button again in order to enter the AUDIO MATRIX mode.
(
See image below, screen will show “AIN” and “AOUT” for AUDIO INPUT and AUDIO OUTPUT.)
3. Press the desired OUTPUT number (1-4)
4. Press the INPUT for the desired audio source you want to route (1-4)
5. To exit, quick press BYPASS button again or wait 15 seconds (matrix will exit automatically)
The.LCD.Screen
shows.the.current.
status
STEP.1:...Press.and.hold.
the.BYPASS.button