AVProEdge AC-MX-88 Скачать руководство пользователя страница 45

Страница: 45 / 51

Maintenance

To ensure reliable operation of this product as well as protecting the safety of any person using or

handling this device while powered, please observe the following instructions.

Use the power supplies provided. If an alternate supply is required, check voltage, polarity

and that it has sufficient power to supply the device it is connected to.

Do not operate these products outside the specified temperature and humidity range given in
the above specifications.

Ensure there is adequate ventilation to allow this product to operate efficiently.

Repair of the equipment should only be carried out by qualified professionals as these prod

ucts contain sensitive components that may be damaged by any mistreatment.

Only use this product in a dry environment. Do not allow any liquids or harmful chemicals to
come into contact with these products.

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this
unit.

Damage Requiring Service

The unit should be serviced by qualified service personnel if:

The DC power supply cord or AC adapter has been damaged

Objects or liquids have gotten into the unit

The unit has been exposed to rain

The unit does not operate normally or exhibits a marked change in performance

The unit has been dropped or the housing damaged

Содержание AC-MX-88




















































Результаты поиска

Содержание AC-MX-88

Отзывы:

Похожие инструкции для AC-MX-88

Бренды по названию

Популярные бренды

AVProEdge AC-MX-88, Руководство пользователя

Результаты поиска

Содержание AC-MX-88

Отзывы:

Похожие инструкции для AC-MX-88

Бренды по названию

Популярные бренды