AVProEdge AC-MX-88, Руководство пользователя

Страница: 9 / 51

9
15. Once the progress bar hits 100% click the CLOSE button, the firmware upgrade process is complete.
16. With the Firmware up to date it’s time to start setting up the matrix. With the AVPro Edge WebUI
open, navigate to the I/O Conifg section. Label the applicable Inputs (Apple TV, Cable Box, Roku, etc)
under the Input Settings - Label.
17. Label the Outputs (Living Room, Bedroom, Den, etc) under the Video Output Settings - Label.
18. Set the HDMI Video Scaling if needed. HDMI outputs can down-scale a 4K signal to 2K (1080P) or
down-scale a 4K 4:4:4 signal down to 4K 4:2:0.
19. With the system and all it’s components powered up it’s time to verify signal path from source to the
sync. For now leave EDID settings to their default 1080P 2CH, the next section Advanced Setup will
cover the more advance settings.
20. Use the Signal Indicator on the HDMI INPUTS. Green means HDMI source is detected, red means that