AVProEdge AC-MX-88, Руководство пользователя

Страница: 13 / 51

1.
Advanced Setup:
WebUI Extracted Audio Output Settings
1. Now navigate to the Extracted Audio Output Settings under I/O Config.
2. The extracted audio ports have 3 distinct operating modes, use the drop-down at the top to select.
The three options are.
Bind to Input (Default) - where the audio port number corresponds to the input signal. This is ideal
for systems where audio is matrixed separately in a zoned amplifier.
Bind to Output
- this configuration the audio will automatically follow the HDMI output. This is ideal
for systems that use local AVR’s for some of the Zones.
Matrix - This mode allows you to matrix the extracted audio ports independently from the HDMI out-
puts. In this mode you there will be a Tab for the extracted audio under the Matrix page, allowing you
to route the audio just like routing the video. If the matrix is set to Bind to Input or Bind to Output this
tab will not be visible.
3. Other available settings for the extracted audio ports include Enable/Disable, Volume control (1-100),
EQ presets (7 generic preset options to choose from), Left/Right balance, and audio delay. Each of
these 5 settings can be changed per extracted audio port.
NOTE: The balanced 5pin and Toslink ports are mirrored and always down-mixed to 2CH audio.
4. You can use the slider or text box to change the volume (settings are 0-100).
13