AVProEdge AC-MX-88, Руководство пользователя

Страница: 19 / 51

Output Settings Label
- Use this to give an name/alias to your outputs (Living Room, Den, Kitchen, etc).
Note: There is a 15 character limit to this field, the name will replace the default “OUT #” throughout the
rest of the WebUI (for instance the Video Matrix tab).
Output Settings State - This drop-down has 4 settings, just like the input settings you can Enable or dis-
able this port. In addition you can also choose Test Pattern to enable a 1080P or 4K color bar test pattern
on that output. This is helpful in verifying the signal chain from Matrix to sync (display). To disable the test
pattern, change the state back to Enabled (default).
WebUI: I/O Config - Output Settings
WebUI: I/O Config - Output Settings Cont.
Output Settings Video Scaling -
The HDMI outputs can down-scale a 4K 4:4:4 to 4k 4:2:0 and also
down-scale a 4K signal down to 2K (1080P).
Output Settings Signal -
The Signal Indicator on the HDMI OUTPUTS shows the current state of the
connection HDMI Output. Green means HDMI sync is detected, red means that the sync is not detected. If
red verify that the output is powered on and that the HDMI cable is properly connected to the sync and to
the back of the matrix.
20
Off
Disabled
On
Enabled