Avolites Pearl Expert Titan, Руководство оператора

Страница: 82 / 149

Page 82 – 8 . Cue Lists
PearlExpertTitan_Man_v2-0.doc 23/09/2009 12:16:00
8.2 Playback
8.2.1 Running a cue list
Raise the fader of the cue list and
press the Go button to run the
first cue. The bottom section of
the display shows the cue list; the
current cue is highlighted in white
and the next cue has a box round
it.
• The HTP levels of cues in the
cue list are mastered by the
fader level.
• You can pause a fade by
pressing the Stop button
above the Go button. Press
Go again to resume the fade.
• You can skip to any cue in
the cue list by selecting a
“next” cue using Wheel A.
When you press Go, the cue
list will run that cue next.
• You can snap back to the previous cue by pressing the Snap Back
button
• You can jump directly to a cue by pressing the Connect button,
then typing in the desired cue number, then pressing Enter or
softkey A. Alternatively at the top level menu you can type the cue
number then press Connect.
• You can use Key Profiles to set the blue and grey buttons of the
playback to have various functions including Go, Stop, Connect,
Next Cue, Prev Cue, Cut Next Cue To Live, and Snap Back.
• When you lower the fader for a cue list, the HTP channels will fade
out, but the cue list will remain active. The section below details
how to kill the cue list.
• You can use timecode to play back a cue list automatically. See
section 8.7.4 on page 87.
8.2.2 Killing a cue list
Once a cue list is fired, it remains active until you kill it. You do this by
holding down the Avo Shift button and pressing the blue Select button
of the cue list’s handle.
You can change this in the Playback Options to make the cue list
automatically clear when the fader reaches zero (press B [Playback
Options] at the program menu, then press the Select button of the cue
list, then select B [Fader Mode Intensity Kill At 0].