Avolites Pearl Expert Titan, Руководство оператора

Страница: 39 / 149

3 . Controlling dimmers and fixtures - Page 39
PearlExpertTitan_Man_v2-0.doc 23/09/2009 12:16:00
• D [Clear Options] opens a submenu showing some further options
(described below).
• E [Clear All Fixtures/Selected Fixtures] sets whether all fixtures
will be cleared from the programmer, or if only currently selected
fixtures will be cleared. This is useful if you want to clear specific
fixtures.
• F [Individual Attributes] allows you to clear individual attributes
from the Programmer. When you press softkey G, you are given a
list of attributes in the Programmer – press the appropriate
softkey to clear that attribute.
The options in the “Clear Options” submenu allow you to:
• A [Auto Reset Mask] sets the mask to be automatically reset to
clear everything each time Clear is pressed, or you can toggle the
option to [Remember Mask] which will keep the mask setting you
used last time.
• B [Leave/Zero Preset Fader Levels] sets how the console deals
with intensity levels which are set on the preset faders. Normally
pressing Clear will remove levels from the Programmer, but the
intensity will remain set on the output. If this option is set to [Zero
Preset Fader Levels] then the intensity will also be set to zero on
the output. This is useful to kill fixtures which have been left on
from a different fixture page.
• C [Freeze current values] sets what happens to LTP (non-
intensity) channels you have modified. If set to [Freeze Current
Values] the channels remain as you set them. If set to [Release To
Playback Values] the channels will go back to how they are set in
the current playback. For example: you have an active playback
making some lights green, then you select the lights and change
them to red. If you press Clear with this option set to [Freeze]
then the lights remain red. If the option is [Release] the lights will
go back to green.
3.1.4 Changing attributes using the wheels
“Attributes” are the functions of the fixture, like pan, tilt, colour,
dimmer, etc. You select which
attributes you want to modify using
the buttons on the right edge of the
console and set values using the
wheels at the bottom of the Pearl.
The attributes available depend on
the fixture type. Dimmer channels
only have a dimmer attribute.
Each attribute button controls two
attributes, one on the left wheel and
one on the right wheel.
1> With some fixtures selected,
press the button for the
attribute to be changed
2> Turn the wheels to set the attribute. The display above the wheels
shows which attributes are being controlled, and the settings
which are available scroll up and down as you turn the wheels.
Attribute select buttons
Control wheels