Avolites Pearl Expert Titan, Руководство оператора

Страница: 66 / 149

Page 66 – 6 . Cues
PearlExpertTitan_Man_v2-0.doc 23/09/2009 12:16:00
6.7.3 Setting attribute fade times for a cue
You can set individual fade times for each attribute group (such as
Position). If you set a time, it overrides the normal times.
To set an attribute group fade time:
1> Press A [Edit Times] at the top level menu.
2> Press the Swop button of the cue to be changed.
3> Press the Attribute Bank button (right hand side) for the attribute
you want to change.
4> Press A [Delay] to set delay time or B [Set fade] to set fade time.
5> Type the new time using the numeric keypad and press Enter to
save it, or press F [Use Global] to delete the attribute times and
go back to the normal times.
6> Press Enter to save the changes.
You can take this even further and set individual fade times for each
fixture. When you select the cue to be changed, you will see that all the
fixtures in the cue are selected. To set attribute times for only certain
fixtures, change the fixture
selection using the Swop
buttons. It is useful to have the
HUD open as it shows the
current times for each fixture.
Press the ALL button to select
all fixtures in the cue.
When you are in the Set Attribute Times menu you can only select
fixtures which are in the cue you are editing.
6.8 Advanced options
To set options for a cue, press B [Playback Options] on the root menu,
then press the swop button of the playback to be edited.
These options are also available for Chases and Cue Lists.
6.8.1 Release mask
A [Release Mask] lets you specify which attributes will be released to
their default state when the playback is killed. You can also use the
Attribute Bank buttons on the right side of the console to set the mask.
The default setting is to not release any attributes.
6.8.2 Shape size/speed on fader
If the cue contains shapes, options B and C set how the shape behaves
when the playback fades in. You can set the size and/or speed to be
either fixed or to change with the fader.
6.8.3 Curve
D [Curve] defines how the attribute values will change when the
playback is faded in. The various curves are illustrated in section 11.4
on page 107.