Avolites Pearl Expert Titan, Руководство оператора

Страница: 76 / 149

Page 76 – 7 . Chases
PearlExpertTitan_Man_v2-0.doc 23/09/2009 12:16:00
will start fading when the first one is half way through its fade.
The order of the fixtures is set by the order you selected them
when the cue was saved; you can change the order using Unfold.
7.7.2 Individual cue times in chases
You can configure each cue in a chase to have its own timing
information. You need to use the Unfold function to set individual times
for cues in chases.
1> Press the blue Unfold button, then the Swop button of the chase
to be edited.
2> Press C [Edit Times] then the Swop button of the unfolded cue
you want to edit.
3> Set up the timing options as required. The options are described
below.
4> Press Unfold to get out of unfold mode.
Initially all the timing options are set to Global. You can cancel any
individual timings and set the time back to global timings by pressing
the softkey for the option then pressing G [Use Global].
The timing options for the cue are:
• Delay
• Fade (in)
• Fade Out
• Fixture Overlap
• Link to Next Step
• Attribute times (see next section)
7.7.3 Setting attribute fade times for a cue in a chase
For each cue in a chase, you can set individual fade times for each
attribute group (such as Position). If you set a time, it overrides the
normal times. You need to use the Unfold function to set attribute
times.
To set an attribute group fade time:
1> Press the blue Unfold button, then the Swop button of the chase
to be edited.
2> Press B [Edit Times] then the Swop button of the unfolded cue
you want to edit.
3> Press the Attribute Bank button (right hand side) for the attribute
you want to change.
4> Press A [Delay] to set delay time or B [Set fade] to set fade time.
5> Type the new time using the numeric keypad and press Enter to
save it, or press F [Use Global] to delete the attribute times and
go back to the normal times.
6> Press Enter to save the changes.
•