Avolites Pearl Expert Titan, Руководство оператора

Страница: 121 / 149

13 . Networking - Page 121
PearlExpertTitan_Man_v2-0.doc 23/09/2009 12:16:00
In the following diagram, a console is connected directly to an eDmx
Encoder and DMX data is transmitted wirelessly to an eDmx Decoder.
Connection from a PC would look like this:
13.5.1 Setting up eDmx
We will set up a system with one Pearl, a Wireless access point, and
one eDmx Decoder Tube.
First we need to set up the decoder tube. Please refer to the eDMX user
manual for further information on setup.
Ensure that the following settings are correct:
• SSID This is the Wireless networks SSID or name, it must be the
same as the Wireless Access Point and all other Tubes on the
same network for every device to function accordingly. The default
SSID is “avolites” (note that this is all lower case)
• IP Address This is the IP address of the unit. One of the benefits
of the eDMX system is that it utilises full IP addresses which
enable the routing of the eDMX data across all kinds of switched
and unswitched networks. For this example we can use 2.0.0.71;
if you have multiple Decoder Tubes, each has to have a unique IP
address in the same range i.e. 2.0.0.x. Each unit must also have a
subnet mask of 255.0.0.0.
• Wendi Universe Set the Wendi universe to 1.
You will also need to set up the SSID, IP address and subnet mask of
the Wireless Access Point to match what you have set on the tube(s).
Again the device has to have a unique IP address in the same range as