Using FRITZ!Box Fon Features on the Analog Line
FRITZ!Box Fon 5124 – 10 Configuration and Operation by Telephone
83
Using FRITZ!Box Fon Features on the Analog
Line
When FRITZ!Box Fon is connected to an analog line, a feature
can be activated directly at the switching station only if the
line is set for this kind of configuration.
Call Forwarding (Call Diversion via the Central
Exchange)
Call forwarding is performed by the ISDN operator’s switch-
ing station. To use call forwarding, FRITZ!Box Fon must be
connected to an ISDN line. Then this feature can be used to
forward calls to an external line. Call forwarding is subject to
charges by the network provider and cannot be used for for-
warding calls to an Internet number.
In addition to call forwarding, there is also call diversion via
FRITZ!Box Fon. Use this kind of call diversion to divert calls to
internal and external lines. See the section “Call Diversion
over FRITZ!Box Fon” from page 79 for more information.
Do not activate both call forwarding and call diversion at the
same time.
For call forwarding you may specify whether you want incom-
ing calls to be forwarded unconditionally, after the fifth ring,
or when busy. Different settings may be configured separate-
ly for each number.
N
Pick up the handset.
sr
<feature>
Dial the sequence shown at left.
Next enter the keyboard shortcut your
network provider has defined for the
desired feature. The given keyboard
shortcut must be obtained from your
network provider.
