Entering Numbers for Calls over Fixed Lines
FRITZ!Box Fon 5124 – 6 Configuring FRITZ!Box Fon for Telephone Connections
37
6.2 Entering Numbers for Calls over Fixed Lines
Your fixed-line numbers must be set up in FRITZ!Box Fon for
fixed-line telephony. Proceed as follows:
1.
Start a web browser.
2.
Enter “fritz.box” in the address field.
3.
Click the “Extensions” command in the “Telephony”
menu.
4.
Click the “Fixed-line Numbers” button.
5.
On the “Fixed-line Numbers” page, specify whether
your fixed line is an ISDN line or an analog line.
6.
Enter the ISDN numbers (MSNs) or the analog number
in the corresponding fields.
7.
Click the “Apply” button.
6.3 Configuring Analog Equipment
FRITZ!Box Fon is configured so that you can make calls to the
analog network immediately after connecting analog termi-
nal devices, without any additional settings required.
The following settings are preconfigured on the analog lines
“FON 1” and “FON 2”:
z
calls can be accepted on both lines: connected terminal
devices will ring at the same time
z
outgoing calls can be conducted on both lines
If the connected terminal devices are to react only to certain
numbers, numbers must be assigned to the extensions. The
number defined as “Number of the extension” also defines
whether calls from this extension will be conducted using
the fixed-line network or the Internet.
To do this, perform the following steps:
1.
Start a web browser.
2.
Enter “fritz.box” in the address field.
3.
Click the “Extensions” command in the “Telephony”
menu.
