Start Computer: Wake on LAN
FRITZ!Box Fon 5113
71
Start Computer: Wake on LAN
The properties page for network devices that are connect-
ed with the FRITZ!Box via a network (LAN) port includes
the “Start Computer” button. Use this button to start com-
puters that support Wake on LAN.
With the Wake on LAN function you can start computers in
your FRITZ!Box via the Internet. For instance, you can ac-
cess a computer at any time using remote maintenance
software, without wasting electricity by keeping the com-
puter switched on permanently.
2.2
IP Settings
The IP settings of the FRITZ!Box are preset upon delivery
with the following values:
The IP address and the corresponding subnet mask yield
the following values:
The following addresses are reserved for certain purpo-
ses:
Factory Settings
All computers are located in the
same IP network
enabled
IP address
192.168.178.1
Subnet mask
255.255.255.0
DHCP server
enabled
Network address of the subnet 192.168.178.0
Entire IP address range for the
computers
192.168.178.2 -
192.168.178.253
192.168.178.1
is used by the FRITZ!Box itself
192.168.178.254
reserved for internal use
192.168.178.255
broadcast address used to send messag-
es into the network
FBFon5113-e.book Seite 71 Mittwoch, 7. Juli 2010 3:40 15