FRITZ!Box Fon 5113
74
Disabling the DHCP Server
Disabling the DHCP Server
You can disable the DHCP server.
To make sure that all computers remain in the same IP net-
work as the FRITZ!Box, you must enter the IP addresses
manually in the computers’ network settings. First disable
the option “Obtain an IP address automatically” and then
enter the IP address manually in the appropriate field.
In the case of the preset IP address of the FRITZ!Box, the
following IP addresses are available for assignment to the
computers:
Each IP address can be assigned only once.
2.6
Subnetwork
By default the option “All computers are located in the
same IP network” is enabled in the FRITZ!Box.
If the factory settings were not changed, this setting has
the following effect:
The DHCP server of the FRITZ!Box assigns all of the com-
puters connected with the FRITZ!Box an IP address from
the address range of the DHCP server.
This means that all of the computers connected with the
FRITZ!Box are located in the same IP network.
Disabling “All computers are located in the same IP
network”
If you switch off the setting “All computers are located in
the same IP network”, the interfaces of the FRITZ!Box will
receive their own IP addresses.
Factory Settings
Upon delivery the interfaces of the FRITZ!Box are config-
ured as follows:
192.168.178.2 - 192.168.178.253
Interface
IP Address
Subnet Mask
DHCP Server
LAN
192.168.178.1 255.255.255.0 enabled
FBFon5113-e.book Seite 74 Mittwoch, 7. Juli 2010 3:40 15