AVL Looms Dobby V Series, Руководство пользователя

Страница: 61 / 110

V-Series Dobby Loom User’s Manual Loom Assembly
Install The Warp Beam Page | 57
Install Optional Second Beam Brackets
If you are using two warp beams, you will need to install additional brackets.
NOTE:
If you ordered a loom with two Warp Beams, these brackets and hardware
will have been packed with the Side Frame Parts.
1) Locate the two Separation Beam Brackets. They are identical. As
shown in the diagram, these brackets bolt into the top of the back
edge of the Rear Verticals.
Figure 49 - Left Side Second
Beam Location
Figure 50 - Right Side Second
Beam Location
2) We’ve pre-installed the mounting bolts in the brackets. Remove the
square nuts from the bolt ends, push the brackets into place, and
tighten the bolts against the square nuts placed in the access holes
on the inside face of Horizontals #6L and #6R.
3) Place the separation beam for the lower warp beam in the cutouts
on the brackets.