AVL Looms Dobby V Series, Руководство пользователя

Страница: 44 / 110

V-Series Dobby Loom User’s Manual Loom Assembly
Install Beater Page | 40
9) Once both Beater Supports are in place, rest the Shuttle Race on
the Horizontals, #7 and #13, above the Beater Supports. The
lengthwise groove that runs along one side should be at the top and
facing toward the rear of the loom.
Figure 34 - Beater Leg
10) From the hardware bag choose the four 1/4” x 2-3/4” carriage bolts
with washers and hex nuts.
11) Now locate the Beater Legs. They are marked to show left and
right. Place the bottom slot of each leg on the center pin of the
Beater Support so that the tapered side of each leg faces away
from the loom.