AVL Looms Dobby V Series, Руководство пользователя

Страница: 104 / 110

V-Series Dobby Loom User’s Manual Additional Loom Information
Troubleshooting Page | 100
Symptom Possible Cause How to Fix it
Cable as well. Make sure
that it moves easily up
and down. If the Dobby
Cable seems to bind,
check for debris in the
hole where it comes
through the Dobby Top.
You may need to use a
very thin piece of wire
to dislodge accumulated
yarn dust or other
debris.
B.) The heddles float;
they are lifted
upwards by the warp
thread when you
tension the warp and
your shed is not even
or not large enough.
1.) The tension in
your warp is greater
than the tension in
the springs that hold
the harnesses down.
Add a second spring to
the harness.
C.) One or more
harnesses that are
supposed to raise
don't.
1.) Left treadle isn't
being pressed all the
way down.
Concentrate on getting
both treadles all the
way through their
travel.
2.) Dobby cables out
of finger slots. Rearrange the cables
according to the
assembly instructions.
D.) Harnesses don't
raise properly. 1.) Harness cables
have been hooked to
the wrong harness. Rearrange the cables.
2.) Springs have been
hooked to the wrong
harnesses.
Rearrange the springs.
E.) Harnesses jam up
on each other.
1.) Heddles are not
distributed evenly
over the harness
sticks.
Redistribute the heddles
evenly on both sides
from the center of the
harness sticks.