AVL Looms Dobby V Series, Руководство пользователя

Страница: 25 / 110

V-Series Dobby Loom User’s Manual Loom Assembly
Connecting the Frames Page | 21
7) Push the bolts into the Lower Back; add the nuts and tighten to
secure the bolt. Final tightening will occur when you square the
finished frame.
Install The Cloth Storage Beam
The frame is now self-supporting. Put it back on its feet. The loom will be
upright for the next section.
The Cloth Storage beam MUST be installed at this point in the assembly
process. Its Axle fits into holes in the Side Frames and once the frames are
joined further, it will be impossible to add the beam.
1) Locate the Beam mounting holes in each Side Frame. These are
about 1” in diameter and lay opposite one another in the Mid Front
Horizontals (#7, #13). The holes are drilled completely through the
frames.
Figure 11 - Cloth Storage Beam
Hole Left
Figure 12 - Cloth Storage Beam
Hole Right
2) Locate the Cloth Storage Beam which has a metal ratchet on one
end. You will also need the Cloth Advance Handle.
3) The Advance Handle has an oblong hole at one end. Fit this hole
over the Cloth Storage Beam Axle, next to the ratchet, with the
black handle pointing to the interior of the loom as shown.