Avid Technology Live Recording Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 68

Avid Technology Live Recording Скачать руководство пользователя страница 5

Chapter 1: Introduction

1

chapter 1

Introduction

Welcome to the

Live Recording Guide for VENUE

Systems and Pro Tools

. This guide is for VENUE

users that are recording and playing back audio
in live performances using Pro Tools. Refer to
this guide to help you:



Make hardware connections between your

VENUE and Pro Tools systems.



Configure your VENUE and Pro Tools systems

for recording and playback.



Record live audio to your Pro Tools system.



Playback Pro Tools audio through your

VENUE system.



Simplify and enhance live recording and play-

back using VENUE Link.



Troubleshoot common issues.

VENUE Recording Options

All VENUE recording options offer assignable in-
puts and outputs, which you can use to record
and playback Pro Tools audio.

Additionally, HDx and the VENUE MADI card
offer several different operating modes for re-
cording and playing back Pro Tools audio.

All Systems

All VENUE recording options (FWx, HDx, and
VENUE MADI) offer assignable inputs and out-
puts. Assignables are patched in the VENUE sys-
tem Patchbay, and are freely available in all op-
erating modes.

Using assignables, you can do any or all of the
following while simultaneously mixing a live
performance:

• Record the Main L/R mix using Direct Outs.

See “Recording the Main L/R Mix” on
page 28.

• Record submixes (or stems) using VENUE

system bus outputs. See “Recording Sub-
mixes” on page 30.

• Assign Pro Tools tracks to any VENUE sys-

tem input channel or FX Return for play-
back of Pro Tools audio.

FWx

With FWx, assignable inputs and assignable out-
puts are available for recording and playing back
Pro Tools audio.

You can also perform the equivalent of a Virtual
Soundcheck using pre-recorded Pro Tools tracks
Pro Tools audio tracks by incorporating VENUE
Snapshots into your workflow. See “FWx Virtual
Soundcheck” on page 35.

«
...
3
4
5
6
7
...
»

Содержание Live Recording





































































Отзывы:

Нет отзывов