Avid Technology Live Recording, Руководство пользователя, Страница: 16 / 68

Live Recording Guide 12
5
For systems with a second Stage Rack, do the
following:
• Select
Enable Stage 2.
• Select
Enable HDX 2 (
or
MADI 2).
• In the Inputs section of the System Config-
uration page, beneath Inputs 49–96, select
Stage 2 .
6
Click Apply . The system restarts with all se-
lected Stage inputs active.
Any audio present on VENUE system Stage in-
put channels is sent to all HDx card ports, or to
the MADI card coaxial
and optical outputs.
Enabling Virtual Soundcheck
Mode
(HDx and VENUE MADI with VENUE Software
2.8.5 and Higher Only)
In Virtual Soundcheck mode, audio from
Pro Tools replaces the corresponding Stage in-
puts one-for-one, and appear in place of those
Stage Inputs in the VENUE Patchbay. All
changes to your live mix (such as channel as-
signments, and input and output processing)
carry over when you enable Virtual Soundcheck
mode. The digital portion of the gain for each
channel is preserved and applied to the incom-
ing signal from Pro Tools. This results in the
same apparent levels for Pro Tools inputs and
Stage inputs.
To enable Virtual Soundcheck mode:
1
Put your system into Config mode.
2
Go to the Options page and click the System
tab to access the System Configuration page.
3
Click
Edit
.
4
For the first HDx or MADI card, in the Inputs
section of the System Configuration page, be-
neath Inputs 1–48 select
HDx1 (
or
MADI 1)
, then
select
Virtual Soundcheck
from the Input format
pop-up menu.
5
For systems with a second HDx or MADI card,
do the following:
• Select
Enable Stage 2.
• Select Enable HDx2 ( or MADI 2).
• In the Inputs section of the System Config-
uration page, beneath Inputs 49–96, select
HDx2 ( or MADI 2) , then select Virtual Sound-
check
from the Input format pop-up menu.
Enabling Stage 2
Selecting Stage 2
In VENUE software 2.8.1 and lower, the
mode called HDx Input was the only mode
available for replacing Stage inputs with
Pro Tools audio inputs. It provided all Vir-
tual Soundcheck features. Beginning in
VENUE software 2.9, these features are pro-
vided in two separate operating modes.
Enabling Virtual Soundcheck (HDx shown)